System Schematic View

Before installing any equipment at the main incomer it is very important to conduct a technical audit.

System technical Specifications

The quality assurance system applies to all activities and it has been developed based on principles defined with in ISO 9001-2008 compliences . The quality assurance system is fully documented & structured for all level of our products.

PARAMETERS	DESCRIPTION
Models	ELIXIR-POWEREX-ELUMAX – NUCLEUS
Configuration	9 KVA TO 2000 KVA (Load Centre)
	Energy Monitoring Software System (Power Network Analyzer) Alarm, SMS Alerts & Web Reporting-Viewing Real Time Electrical Data & All Types User & Power Consumption Reports.
Phase & Voltage	3 Phase, 4 Wire & 415V,+/-5%
Frequency	50Hz,+/- 3%
Cable Terminations	Bottom Entry / Top Entry with Gland Plate, Heavy duty Input & Output Terminals, Special Cable Chambers & Bus Bar Terminals
Type of Setting & tap Changer	Selectable Programming & Settings to Suit Conditions for % of Savings & Off Circuit Tap Changer.
Installation Facility	Indoor Facility, Outdoor (Optional)
Enclosures	IP 32, Powder Coated CRCA Sheet Steel Enclosure Lowers & Fans for Ventilations
Duty Cycle	Continuous (24 x 7)
System/Equipment Life	30 years & above
System Maintenance	Easy to bypass for Maintenance without effecting the power supply network
Indications	LED Status / Energy Meter / Power Analyzer
Protection	Complete Short Circuit & Over load Protection through ACB / SFU / MCB / MCCB Micro processor based LSIG protection (Can be made available optionally at extra cost)
Insulation Class	Class “F” & “H”
Standard	IS 11171, IS 2026 IEC 60947. Is13947
Ambient Temperature	-5 to 60c
Efficiency	>99%
Cooling	Air Natural (AN).
Insulation	3 KV Line to Earth

Product Range & Dimensions

Comprehensive range of our Nucleus ,Elumax , Elixir , Elcolux&Powerex Models enclosure with IP-32 powder quoted CRCA sheet steel & Fan for ventilation. Bottom & Top Entry with Gland Plate.